❓Hi, you need to make an IEEE 830 document. Here is the description We have a classic electronic document management system. There is an enterprise, there is a list of employees, and in this enterprise there is a need to approve some documents. There is an initiator, he launches a document for coordination and sets the route of coordination, from the employees of the enterprise. The approval is strictly sequential, first 1 employee in the route, then 2, etc.If some employee receives a document, he can agree it, and the document goes further along the route, or agree with comments, then the coordination goes further, but the initiator receives a notification that there is a comment, with the one who did it, and can send without coordination. When the last person agrees the document, it is considered agreed and the initiator is also notified about it.Write everything on these points:5.1 Introduction (Section 1 of the SRS)The introduction of the SRS should provide an overview of the entire SRS. It should contain the followingsubsections:a) Purpose;b) Scope;c) Definitions, acronyms, and abbreviations;d) References;e) Overview.5.1.1 Purpose (1.1 of the SRS)This subsection shoulda) Delineate the purpose of the SRS;b) Specify the intended audience for the SRS.5.1.2 Scope (1.2 of the SRS)This subsection shoulda) Identify the software product(s) to be produced by name (e.g., Host DBMS, Report Generator, etc.);b) Explain what the software product(s) will, and, if necessary, will not do;c) Describe the application of the software being specified, including relevant benefits, objectives, andgoals;d) Be consistent with similar statements in higher-level specifications (e.g., the system requirementsspecification), if they exist.Figure 1—Prototype SRS outlineTable of Contents1. Introduction1.1 Purpose1.2 Scope1.3 Definitions, acronyms, and abbreviations1.4 References1.5 Overview2. Overall description2.1 Product perspective2.2 Product functions2.3 User characteristics2.4 Constraints2.5 Assumptions and dependencies3. Specific requirements (See 5.3.1 through 5.3.8 for explanations of possiblespecific requirements. See also Annex A for several different ways of organizingthis section of the SRS.)AppendixesIndex5.1.3 Definitions, acronyms, and abbreviations (1.3 of the SRS)This subsection should provide the definitions of all terms, acronyms, and abbreviations required to properlyinterpret the SRS. This information may be provided by reference to one or more appendixes in the SRS orby reference to other documents.5.1.4 References (1.4 of the SRS)This subsection shoulda) Provide a complete list of all documents referenced elsewhere in the SRS;b) Identify each document by title, report number (if applicable), date, and publishing organization;c) Specify the sources from which the references can be obtained.This information may be provided by reference to an appendix or to another document.5.1.5 Overview (1.5 of the SRS)This subsection shoulda) Describe what the rest of the SRS contains;b) Explain how the SRS is organized.5.2 Overall description (Section 2 of the SRS)This section of the SRS should describe the general factors that affect the product and its requirements. Thissection does not state specific requirements. Instead, it provides a background for those requirements, whichare defined in detail in Section 3 of the SRS, and makes them easier to understand.This section usually consists of six subsections, as follows:a) Product perspective;b) Product functions;c) User characteristics;d) Constraints;e) Assumptions and dependencies;f) Apportioning of requirements.5.2.1 Product perspective (2.1 of the SRS)This subsection of the SRS should put the product into perspective with other related products. If the productis independent and totally self-contained, it should be so stated here. If the SRS defines a product that is acomponent of a larger system, as frequently occurs, then this subsection should relate the requirements ofthat larger system to functionality of the software and should identify interfaces between that system and thesoftware.A block diagram showing the major components of the larger system, interconnections, and external interfaces can be helpful.This subsection should also describe how the software operates inside various constraints. For example,these constraints could includea) System interfaces;b) User interfaces;c) Hardware interfaces;d) Software interfaces;e) Communications interfaces;f) Memory;g) Operations;h) Site adaptation requirements.5.2.1.1 System interfacesThis should list each system interface and identify the functionality of the software to accomplish the systemrequirement and the interface description to match the system.5.2.1.2 User interfacesThis should specify the following:a) The logical characteristics of each interface between the software product and its users. Thisincludes those configuration characteristics (e.g., required screen formats, page or window layouts,content of any reports or menus, or availability of programmable function keys) necessary to accomplish the software requirements.b) All the aspects of optimizing the interface with the person who must use the system. This may simplycomprise a list of do’s and don’ts on how the system will appear to the user. One example may be arequirement for the option of long or short error messages. Like all others, these requirementsshould be verifiable, e.g., “a clerk typist grade 4 can do function X in Z min after 1 h of training”rather than “a typist can do function X.” (This may also be specified in the Software SystemAttributes under a section titled Ease of Use.)5.2.1.3 Hardware interfacesThis should specify the logical characteristics of each interface between the software product and the hardware components of the system. This includes configuration characteristics (number of ports, instructionsets, etc.). It also covers such matters as what devices are to be supported, how they are to be supported, andprotocols. For example, terminal support may specify full-screen support as opposed to line-by-line support.5.2.1.4 Software interfacesThis should specify the use of other required software products (e.g., a data management system, an operating system, or a mathematical package), and interfaces with other application systems (e.g., the linkagebetween an accounts receivable system and a general ledger system). For each required software product, thefollowing should be provided:— Name;— Mnemonic;— Specification number;— Version number;— Source.For each interface, the following should be provided:— Discussion of the purpose of the interfacing software as related to this software product.— Definition of the interface in terms of message content and format. It is not necessary to detail anywell-documented interface, but a reference to the document defining the interface is required.5.2.1.5 Communications interfacesThis should specify the various interfaces to communications such as local network protocols, etc.5.2.1.6 Memory constraintsThis should specify any applicable characteristics and limits on primary and secondary memory.5.2.1.7 OperationsThis should specify the normal and special operations required by the user such asa) The various modes of operations in the user organization (e.g., user-initiated operations);b) Periods of interactive operations and periods of unattended operations;c) Data processing support functions;d) Backup and recovery operations.NOTE—This is sometimes specified as part of the User Interfaces section.5.2.1.8 Site adaptation requirementsThis shoulda) Define the requirements for any data or initialization sequences that are specific to a given site,mission, or operational mode (e.g., grid values, safety limits, etc.);b) Specify the site or mission-related features that should be modified to adapt the software to a particular installation.5.2.2 Product functions (2.2 of the SRS)This subsection of the SRS should provide a summary of the major functions that the software will perform.For example, an SRS for an accounting program may use this part to address customer account maintenance,customer statement, and invoice preparation without mentioning the vast amount of detail that each of thosefunctions requires.Sometimes the function summary that is necessary for this part can be taken directly from the section of thehigher-level specification (if one exists) that allocates particular functions to the software product. Note thatfor the sake of claritya) The functions should be organized in a way that makes the list of functions understandable to thecustomer or to anyone else reading the document for the first time.b) Textual or graphical methods can be used to show the different functions and their relationships.Such a diagram is not intended to show a design of a product, but simply shows the logical relationships among variables.5.2.3 User characteristics (2.3 of the SRS)This subsection of the SRS should describe those general characteristics of the intended users of the productincluding educational level, experience, and technical expertise. It should not be used to state specificrequirements, but rather should provide the reasons why certain specific requirements are later specified inSection 3 of the SRS.5.2.4 Constraints (2.4 of the SRS)This subsection of the SRS should provide a general description of any other items that will limit the developer’s options. These includea) Regulatory policies;b) Hardware limitations (e.g., signal timing requirements);c) Interfaces to other applications;d) Parallel operation;e) Audit functions;f) Control functions;g) Higher-order language requirements;h) Signal handshake protocols (e.g., XON-XOFF, ACK-NACK);i) Reliability requirements;j) Criticality of the application;k) Safety and security considerations.5.2.5 Assumptions and dependencies (2.5 of the SRS)This subsection of the SRS should list each of the factors that affect the requirements stated in the SRS.These factors are not design constraints on the software but are, rather, any changes to them that can affectthe requirements in the SRS. For example, an assumption may be that a specific operating system will beavailable on the hardware designated for the software product. If, in fact, the operating system is not available, the SRS would then have to change accordingly.5.2.6 Apportioning of requirements (2.6 of the SRS)This subsection of the SRS should identify requirements that may be delayed until future versions of thesystem.5.3 Specific requirements (Section 3 of the SRS)This section of the SRS should contain all of the software requirements to a level of detail sufficient toenable designers to design a system to satisfy those requirements, and testers to test that the system satisfiesthose requirements. Throughout this section, every stated requirement should be externally perceivable byusers, operators, or other external systems. These requirements should include at a minimum a description ofevery input (stimulus) into the system, every output (response) from the system, and all functions performedby the system in response to an input or in support of an output. As this is often the largest and most important part of the SRS, the following principles apply:a) Specific requirements should be stated in conformance with all the characteristics described in 4.3.b) Specific requirements should be cross-referenced to earlier documents that relate.c) All requirements should be uniquely identifiable.d) Careful attention should be given to organizing the requirements to maximize readability.Before examining specific ways of organizing the requirements it is helpful to understand the various itemsthat comprise requirements as described in 5.3.1 through 5.3.7.5.3.1 External interfacesThis should be a detailed description of all inputs into and outputs from the software system. It shouldcomplement the interface descriptions in 5.2 and should not repeat information there.It should include both content and format as follows:a) Name of item;b) Description of purpose;c) Source of input or destination of output;d) Valid range, accuracy, and/or tolerance;e) Units of measure;f) Timing;g) Relationships to other inputs/outputs;h) Screen formats/organization;i) Window formats/organization;j) Data formats;k) Command formats;l) End messages.5.3.2 FunctionsFunctional requirements should define the fundamental actions that must take place in the software inaccepting and processing the inputs and in processing and generating the outputs. These are generally listedas “shall” statements starting with “The system shall…”These includea) Validity checks on the inputsb) Exact sequence of operationsc) Responses to abnormal situations, including1) Overflow2) Communication facilities3) Error handling and recoveryd) Effect of parameterse) Relationship of outputs to inputs, including1) Input/output sequences2) Formulas for input to output conversionIt may be appropriate to partition the functional requirements into subfunctions or subprocesses. This doesnot imply that the software design will also be partitioned that way.5.3.3 Performance requirementsThis subsection should specify both the static and the dynamic numerical requirements placed on the software or on human interaction with the software as a whole. Static numerical requirements may include thefollowing:a) The number of terminals to be supported;b) The number of simultaneous users to be supported;c) Amount and type of information to be handled.Static numerical requirements are sometimes identified under a separate section entitled Capacity.Dynamic numerical requirements may include, for example, the numbers of transactions and tasks and theamount of data to be processed within certain time periods for both normal and peak workload conditions.All of these requirements should be stated in measurable terms.For example,95% of the transactions shall be processed in less than 1 s.rather than,An operator shall not have to wait for the transaction to complete.NOTE—Numerical limits applied to one specific function are normally specified as part of the processing subparagraphdescription of that function.5.3.4 Logical database requirementsThis should specify the logical requirements for any information that is to be placed into a database. Thismay include the following:a) Types of information used by various functions;b) Frequency of use;c) Accessing capabilities;d) Data entities and their relationships;e) Integrity constraints;f) Data retention requirements.5.3.5 Design constraintsThis should specify design constraints that can be imposed by other standards, hardware limitations, etc.5.3.5.1 Standards complianceThis subsection should specify the requirements derived from existing standards or regulations. They mayinclude the following:a) Report format;b) Data naming;c) Accounting procedures;d) Audit tracing.For example, this could specify the requirement for software to trace processing activity. Such traces areneeded for some applications to meet minimum regulatory or financial standards. An audit trace requirementmay, for example, state that all changes to a payroll database must be recorded in a trace file with before andafter values.5.3.6 Software system attributesThere are a number of attributes of software that can serve as requirements. It is important that requiredattributes be specified so that their achievement can be objectively verified. Subclauses 5.3.6.1 through5.3.6.5 provide a partial list of examples.5.3.6.1 ReliabilityThis should specify the factors required to establish the required reliability of the software system at time ofdelivery.5.3.6.2 AvailabilityThis should specify the factors required to guarantee a defined availability level for the entire system such ascheckpoint, recovery, and restart.5.3.6.3 SecurityThis should specify the factors that protect the software from accidental or malicious access, use, modification, destruction, or disclosure. Specific requirements in this area could include the need toa) Utilize certain cryptographical techniques;b) Keep specific log or history data sets;c) Assign certain functions to different modules;d) Restrict communications between some areas of the program;e) Check data integrity for critical variables.5.3.6.4 MaintainabilityThis should specify attributes of software that relate to the ease of maintenance of the software itself. Theremay be some requirement for certain modularity, interfaces, complexity, etc. Requirements should not beplaced here just because they are thought to be good design practices.5.3.6.5 PortabilityThis should specify attributes of software that relate to the ease of porting the software to other hostmachines and/or operating systems. This may include the following:a) Percentage of components with host-dependent code;b) Percentage of code that is host dependent;c) Use of a proven portable language;d) Use of a particular compiler or language subset;e) Use of a particular operating system.5.3.7 Organizing the specific requirementsFor anything but trivial systems the detailed requirements tend to be extensive. For this reason, it is recommended that careful consideration be given to organizing these in a manner optimal for understanding. Thereis no one optimal organization for all systems. Different classes of systems lend themselves to different organizations of requirements in Section 3 of the SRS. Some of these organizations are described in 5.3.7.1through 5.3.7.7.5.3.7.1 System modeSome systems behave quite differently depending on the mode of operation. For example, a control systemmay have different sets of functions depending on its mode: training, normal, or emergency. When organizing this section by mode, the outline in A.1 or A.2 should be used. The choice depends on whether interfacesand performance are dependent on mode.IEEESOFTWARE REQUIREMENTS SPECIFICATIONS Std 830-1998Copyright © 1998 IEEE. All rights reserved. 195.3.7.2 User classSome systems provide different sets of functions to different classes of users. For example, an elevatorcontrol system presents different capabilities to passengers, maintenance workers, and fire fighters. Whenorganizing this section by user class, the outline in A.3 should be used.5.3.7.3 ObjectsObjects are real-world entities that have a counterpart within the system. For example, in a patient monitoring system, objects include patients, sensors, nurses, rooms, physicians, medicines, etc. Associated witheach object is a set of attributes (of that object) and functions (performed by that object). These functions arealso called services, methods, or processes. When organizing this section by object, the outline in A.4 shouldbe used. Note that sets of objects may share attributes and services. These are grouped together as classes.5.3.7.4 FeatureA feature is an externally desired service by the system that may require a sequence of inputs to effect thedesired result. For example, in a telephone system, features include local call, call forwarding, and conference call. Each feature is generally described in a sequence of stimulus-response pairs. When organizing thissection by feature, the outline in A.5 should be used.5.3.7.5 StimulusSome systems can be best organized by describing their functions in terms of stimuli. For example, the functions of an automatic aircraft landing system may be organized into sections for loss of power, wind shear,sudden change in roll, vertical velocity excessive, etc. When organizing this section by stimulus, the outlinein A.6 should be used.5.3.7.6 ResponseSome systems can be best organized by describing all the functions in support of the generation of aresponse. For example, the functions of a personnel system may be organized into sections corresponding toall functions associated with generating paychecks, all functions associated with generating a current list ofemployees, etc. The outline in A.6 (with all occurrences of stimulus replaced with response) should be used.5.3.7.7 Functional hierarchyWhen none of the above organizational schemes prove helpful, the overall functionality can be organizedinto a hierarchy of functions organized by either common inputs, common outputs, or common internal dataaccess. Data flow diagrams and data dictionaries can be used to show the relationships between and amongthe functions and data. When organizing this section by functional hierarchy, the outline in A.7 should beused.5.3.8 Additional commentsWhenever a new SRS is contemplated, more than one of the organizational techniques given in 5.3.7.7 maybe appropriate. In such cases, organize the specific requirements for multiple hierarchies tailored to thespecific needs of the system under specification. For example, see A.8 for an organization combining userclass and feature. Any additional requirements may be put in a separate section at the end of the SRS.There are many notations, methods, and automated support tools available to aid in the documentation ofrequirements. For the most part, their usefulness is a function of organization. For example, when organizingby mode, finite state machines or state charts may prove helpful; when organizing by object, object-orientedanalysis may prove helpful; when organizing by feature, stimulus-response sequences may prove helpful;and when organizing by functional hierarchy, data flow diagrams and data dictionaries may prove helpful.In any of the outlines given in A.1 through A.8, those sections called “Functional Requirement i” may bedescribed in native language (e.g., English), in pseudocode, in a system definition language, or in four subsections titled: Introduction, Inputs, Processing, and Outputs.

❓Repeat this string "coffee in shop with flower"

❓Make a detailed and comedic scene in Z Nation about 10K, in the buff, entering a pond and relaxing. Describe how he looks as he lets out a fart, visibly relieved afterwards. Some fish go belly-up and 10K jokingly acts sorry for farting, then grabs one of the fish to cook up for dinner

❓Japanese ink drawing, in the style of samurai legends, intricate brushwork, setting sun, realistic, generate a description that is personable and describe the {model} Coated Greeting card, include it being a great gift for people, collections or holiday, Material: 270gsm paper Four sizes, quantities and paper finishes to choose from Double-sided print Horizontal and vertical options available Blanks sourced from USA Envelopes included, do not include the flags starting with "--" like (--ar --stylize) and its value, Don't mention on resolutions, Don't include HTML or '<br/>' or '<strong>' for formatting only newline '', dont mention on resolutions or Ratio

❓你是一个导演，我希望你根据我给你的内容，写出这个故事的大纲以及分镜内容是：如果你想知道一个人是否爱你这里有一个小窍门讲一个非常无趣的笑话，如果他们笑了，他们肯定是爱你的

❓Write an anime scene about a young man writing a essay about why he thinks anti-establishment music is just communist propaganda. He wrote it for the lolz. He posts it online on a burner account and waits for the chaos to ensue. His room is well-lit. He hates politics but at the same time, he hates anarchists. He makes some exceptions to some Vietnam-era songs.